Sunday, May 31, 2015

Representing PW At Lie-Nielsen Open House 2015

My hand tool journey with Popular Woodworking, from Don Weber on the cover, through learning from people like Roy Underhill, to teaching for Popular Woodworking University.

The 2015 Lie-Nielsen Summer Open House will be July 10-11 at the Lie-Nielsen Toolworks in Warren, ME. This is a free event open to all, a great opportunity to see behind the scenes, try all their tools, and meet a bunch of great woodworkers.

The list of guest demonstrators is headed by the superb Roy Underhill, host of The Woodwright's Shop on PBS, one of my woodworking heroes.

I'm honored to be representing Popular Woodworking Magazine at the Open House, not as an employee, but as an instructor for their online Popular Woodworking University. Look for the PW banner, say hello, and join me making some shavings!

My new PWU course Intro To Hand Tools starts July 15; registration is currently open. On the registration page you can watch a 3-minute introductory video. The cost is $59.

In nearly 40 short online videos, I cover a wide range of beginning hand tool skills to give you a solid foundation. "Fistfights And Fundamentals" segments help sort out the various arguments about different ways of doing things.

You can watch a free lesson below from Popular Woodworking's YouTube channel: Long Grain Rabbets (2 methods: chisel, and moving fillister plane).

The full course includes 5 additional ways to do this. Whether you're a first-time beginner with the barest set of tools, or already have some skills and a more extensive set, you should be able to find something here.

If you'd like to see the full range of topics covered in the course, you can watch my trade show trailer below that I'll have running on a TV at the Open House. It's silent to avoid disturbing other exhibitors and demonstrators, but it shows a montage of short snippets from the entire course.

And if you'd like some suggestions for expanding your set of tools while at the Open House, I'll have a complete list of all the tools appearing in the course, from anonymous antique to modern high quality premium brand name.

It's fitting that I'll be representing PW, because the magazine has been key to my development as a hand tool woodworker. Don Weber's cover story in the April, 2004 issue led me down the garden path. From there, then-editor Christopher Schwarz's articles, books, and videos gave me the background to start understanding what Roy and others were doing.

Then it was just a small matter of making shavings to develop the skills!

Friday, May 8, 2015

Popular Woodworking University: Intro To Hand Tools

Welcome to Intro To Hand Tools!

Big news! I'm very excited to announce my new course at Popular Woodworking University, the new site for online classes from Popular Woodworking Magazine. The course is Intro To Hand Tools.

Click here for registration details and a 3-minute introductory video.
Update: the Fall 2015 session is now open, running through January 21. You can read some reviews of the now-completed first session here.
This ambitious project is my magnum opus. In a series of nearly 60 videos, ranging from 2 to 20 minutes, I teach you everything you need to know about the basics of doing all your woodworking with hand tools, starting from bare lumber. You can watch in bite-size chunks.

Note that Popular Woodworking University provides registered students permanent read-only access to courses after they end. That means you can watch the videos any time after the course end date, but you won’t be able to ask questions or use the discussions after that.

This is Hand Tools 101. Much of the concept was motivated by all the online forum posts I saw that start "I'm new to hand tools, and I need help with...". I've gone through all the same problems you have, so I can show you what worked for me.

I cover multiple methods for doing things, so you can match the method to your preferences, tools, and project at hand. In my Fistfights and Fundamentals segments, I outline the arguments about the different methods, then break them down and look at why they work.

One of several different sharpening methods.

The cost is $59. You'll get all the knowledge I've accumulated, much of which you can read about here, but demonstrated on camera with a variety of closeups and angles so you can see it in detail. These photos are stills from just a few of the videos to show what you can expect. You'll also see how to deal with the problems that crop up.

This is for anyone with any level of interest in hand tools, no prior knowledge required. Or if you already have some hand tool experience, or use power tools but are interested in incorporating hand tools into your work, this will help you expand your capabilities.

How to angle the saw when correcting a rough rip cut.

How to joint an edge as part of the FEWTEL sequence.

If you have limited space, such as an apartment or small house, hand tools are a great way to enjoy the craft. All you need is 4'x6', just 24 square feet. It doesn't even need to be permanent. You can setup a folding workbench to do your work, then fold it up and set it aside.

How to raise a panel using handplanes and a chisel, rabbet plane, shoulder plane, or skew block plane.

How to rabbet an edge using a chisel, moving fillister plane, or wooden skew rabbet moulding plane.

By the time you've completed the course and practiced the skills, you'll be able to take on any project with hand tools. You'll also be ready to take more advanced classes from any of the fine woodworking schools in the world, confident that you have the background to make your tools sing.

How to make dovetails, pins first or tails first, sawing or chiseling the waste.

My favorite antique tool, the Spofford brace. This was made about the time Abraham Lincoln was president.

Got questions? Like, why do everything with hand tools when there are power tools? Watch the 3-minute video introduction on the course page. You'll get some preview of the lessons.

How to shape a curve using a spokeshave.

The course is in 7 major parts, each broken down into multiple video segments. Additional non-video content includes recommended reading, links, and tool lists.

The syllabus is listed below. I'm still in the process of creating the videos, so the exact list may change a bit.
  • 1. Introduction
    • Introduction
    • Tools
    • Safety
    • Saw Types
    • Plane Types
  • 2. Sharpening
    • Sharpening Fistfights and Fundamentals
    • Back Preparation
    • Convex Bevel on Oilstones
    • Double Bevel on Sandpaper
    • Double Bevel on Waterstones
    • Double Bevel Jig on Waterstones
    • Hollow Ground with Diamond Plates
    • Saw Sharpening
    • Scraper Sharpening
  • 3. Stock Preparation
    • Gauges, Squares and Marking Knives
    • Rough Stock Preparation
    • Rough Sawing Exercise
    • Handplane Fistfights and Fundamentals
    • Fine Stock Preparation (3 parts)
    • Planing Exercise
    • Tapering
    • Panel Raising (3 parts)
  • 4. Simple Joinery
    • Grain and Strength
    • Edge Joints
    • Rabbets
    • Dados
    • Grooves
    • Lap Joints
  • 5. Mortise and Tenon
    • Mortise and Tenon Fistfights and Fundamentals
    • Blind Mortise and Tenon
    • Through Mortise and Tenon
    • Bridle Joint
  • 6. Dovetails
    • Dovetails Fistfights and Fundamentals
    • Full Dovetails
    • Half-Blind Dovetails
    • Sliding Dovetails
  • 7. Boring and Curves
    • Boring Holes
    • Roughing-Out Curves
    • Refining Curves

About The Music

Gary C. Hicks, Sr., with the guitar he built himself. Photo used by permission of Available Light Photography/Kathy Hicks Murray.

The music you hear in the video is by my guitar teacher, Gary C. Hicks, Sr. He'll be 75 this year and has been playing since he was in 7th grade. He plays decades of rock 'n' roll, country, jazz, and swing. His teacher was Bill Leavitt, who went on to head the guitar department at Boston's famed Berklee School of Music.

Gary's been playing professionally since 1958 with local bands, opening on stage for national acts. His most memorable show was when he played with Fabian, one of the biggest stars of the day, complete with surging crowds of teenagers, filling in when Fabian's lead guitarist missed the plane.

We recorded this in my workshop. After a little warmup on the electric guitar he built himself decades ago, he experimented with a few riffs and asked me what I thought. I said I liked it and asked what it was. Just something he made up on the spot, in the Chet Atkins style.

He just improvised and filled bars until it was the same length as the video, making it look effortless. It sounds like 2 or 3 instruments, but that's one guy, one guitar, one take. Amazing! That's what 60 years of experience gets you.

That's what it means to be a master of your craft.